IP-H264 WIRELESS PAN AND TILT IP CAMERA By Armor

Wireless pan and tilt ip camera - The wireless pan and tilt IP camera is very easy to set up unlike most IP cameras you need extensive network knowledge just to set them up. In order to set this camera up just 1 option has to be checked on your wireless router, UPNP mode has to be enabled. Then all you will have to do is go to a web site and sign in to view the camera from anywhere in the world. You can use your smart phones, smart pads and web browsers to access the camera. It features 720P resolution, 270 degrees pan, 90 degrees tilt, and support two-way voice intercom. This camera can be used as a nanny camera, baby monitor, and surveillance camera while you are away.

Specifications: Wireless: wifi, Resolution: 720P,1280&720pixels, Sensor: COMS, Lens:3.6mm, Fps:30fps, Image compression: H.264 dual date rate, Bps:16kb to 4MB support continuous adjustment, Alarm and image capture: 5 seconds continuous capture, adjustable time slot, Infrared:10m IR-CUT automatic switching, Motion detect: Support full-screen or dispersion of the multi-zone motion detection, Power-down recovery: Automatically resume to the initial state when power on, Network port: Standard RJ45 port, Network protocols: TCP/IP\UDP\ HTTP\DNS\DDNS\DHCP\FTP\NTP\PPPOE\SMTP\ UPNP, Alarm: upload alarm images in SD card, store the images can also send by E-mail, Pan/tilt rotate: H:270 degree & V:90 degree, Browser: IE/Chrome/Firefox/Opera, Mobile:IPHONE/IPAD/ANDROID/WP8/ Symbian, Alarm ports IO: Alarm input, one alarm output, Image setting: Brightness, contrast, saturation, scenes, Local storage: Micro SD Card, Voice: support two-way voice intercom, build in microphone and speakers, support external pickup and speakers, Power: DC 5V/2APower: DC 5V/2A

UPC : 0747670700228